MK3A Rebel Build — Booster
MK3A Rebel (K0001) Build Part 3 - Booster Assembly and Finish Prep
Booster Build Elmers Wood Filler Finishing MK3A Part 3 Rebel

Part 3 of this blog series finishes the MK3A Rebel's booster section . If you missed Part 2 of this series, it is available at this link. As stated in the assembly instructions provided with the kit, epoxy is required for kit assembly. I use quick drying 5 minute epoxy, but any two part epoxy is fine. For Part 3, we will need: Fin can assembly from Part 2 of the blog series 9 inch body tube (Part #6) Chambered Baffle (Part #5) 0.25 inch screw eye (Part #2) During this series of steps, preliminary work is done to prepare...