Welcome to XROX Aerospace The sky is not the limit!!
Welcome to XROX Aerospace The sky is not the limit!!
Cart 0

MK3A Rebel Build — Finishing

MK3A Rebel (K0001) Build Part 5 - Final Assembly and Paint Prep

Build Elmers Wood Filler Finishing Kit MK3A Part 5 Rebel Stand XROX Aerospace

MK3A Rebel (K0001) Build Part 5 - Final Assembly and Paint Prep

MK3A Rebel (K0001) Build Part 5 - Final Assembly and Paint Prep

Read more →


MK3A Rebel (K0001) Build Part 3 - Booster Assembly and Finish Prep

Booster Build Elmers Wood Filler Finishing MK3A Part 3 Rebel

MK3A Rebel (K0001) Build Part 3 - Booster Assembly and Finish Prep

Part 3 of this blog series finishes the MK3A Rebel's booster section .  If you missed Part 2 of this series, it is available at this link. As stated in the assembly instructions provided with the kit, epoxy is required for kit assembly.  I use quick drying 5 minute epoxy, but any two part epoxy is fine. For Part 3, we will need: Fin can assembly from Part 2 of the blog series 9 inch body tube (Part #6) Chambered Baffle (Part #5) 0.25 inch screw eye (Part #2) During this series of steps, preliminary work is done to prepare...

Read more →